Products

If you are looking to put JL8 brakes on your 1967-69 Camaro and it did not come with disc brakes to begin with these are a must. These are sold in a pair.

These brake rotors are the standard style brake rotors that originally came with the JL8 setup. Sold each.

These brake rotors are a high performance upgrade for the JL8 setup. These are a must for extreme braking conditions, cross-drilled rotors and slotted run cooler which means less brake fade. Sold each.

This is the caliper hose bracket set for the JL8 setup. Also called caliper line brackets, mounts to caliper bracket. They are sold in a set.

These are the front disc brake backing plates for the JL8 setup. They are silver cadmium plated. They are sold in pairs.

These are the correct park brake cable retaining brackets for the JL8 setup. Technically correct 2 piece set.

These are the correct park brake cables for the rear of the JL8 setup. Technically correct 2 piece set OEM steel set.

These are the correct park brake cables for the rear of the JL8 setup. Technically correct 2 piece set in stainless set.

These are the rear disc brake backing plates for the JL8 setup. They are silver cadmium plated. They are sold in pairs.

These are reproduction 4-piston rear calipers for the JL8 setup. These are sold in pairs.

These brake rotors are the standard style brake rotors that originally came with the JL8 setup. Sold each.

These brake rotors are a high performance upgrade for the JL8 setup. These are a must for extreme braking conditions, cross-drilled and slotted rotors run cooler which means less brake fade. Sold each.

Factory Holley Carburetor this is the original style carb used by GM with the Cross Ram setup, 600CFM.

This is just the fuel lines for the Cross Ram setup with fuel block included.

Fiberglass Factory Cross Ram Hood mounts directly to the factory hood hinges you must use the hood prop rod or use a pair of light weight hood springs.

Freight charges will be billed on a separate PayPal invoice after purchase of this item is complete.

Estimated freight charges to a zoned business address is around $160.00.

Estimated freight charges to a zoned residential address is around $175.00.

Contact thepartsman@blastcomm.com for more information on shipping.

Factory throttle cable with correct end manufactured to OEM specifications, cable is 28” long.

Correct Cross Ram air cleaner base, lid and short style air filter.

Assembly comes complete with:

The 2 Piece Intake (upper GM#: 3941130 and lower Gm#: 3941126) which has the correct (W) with Snowflake design that is a registered with the United States Trademark and Patent Office; this is the same mark used by the Winters Foundry when they produced this intake for General Motors, the date code on the intake is 11-25-68, also comes with the Water Neck, Water Neck Bolts, Water Neck Hex Plug, Throttle Linkage, Throttle Return Spring, Throttle Cable Bracket, Throttle Return Spring Tab Bracket, PCV Fitting, Filler Plug Block off Plate, Fuel Block, Fuel Lines, Fuel Block and Fuel Line Kit, Carburetor Studs, 2 Holley 4295 (GM#: 3957859) Carbs, the date code on the carbs is 891, Carb Studs with Wing Nuts and the Cross Ram Wide Base Air Cleaner Assembly (air cleaner base, lid and short style air filter).

This is a brand new GM Distributor for use with the Cross Ram only (does not have vacuum advance).

This is a brand new Amplifier Box for Transistorized Ignitions.

This is a brand new wiring harness used to wire up the Transistorized Ignition Systems. 2 piece harness.